Send This Page To a Friend
|
 | 
Wind
Fence Product Instructions & Pictures
DIRECTIONS
 Tools
needed: one hammer
•
Lay the netting on the ground (seamed side down)
in the location and direction you wish to erect
it.
•
Spray the inside of the couplers on the end of the
pipe with DW40 or some other spray lubricant. This
will make it easier to take disassemble the unit
later. Join a piece of pipe with a white corner
coupler attached to another piece of pipe making
one of your 5' vertical support legs. Do the same
thing with the other piece that has the corner coupler
attached, creating the second leg for the opposite
side. Take these two support legs and insert them
into the end pockets of the netting. Position them
so the open end of the couplers face the center
of the net.
•
Next, join the piece of pipe with the white T coupler
attached to it, to another piece of pipe. This is
your 5' center leg. Lay it on the center of the
net. Always position it on the downwind side of
the net.
•
Now join two more pieces of pipe. Insert one end
into a corner coupler and the other end into one
side of the T coupler. Repeat this process on the
other side to complete the 10' horizontal support
bar.
•
With a hammer, pound the three pieces of rebar 5"-
8" into the ground - each one directly in line with
one of the white couplers. Do this with due care
so as not to injure yourself.
•
You may now need a second person to help lift the
fence in order to slide the three legs of pipe over
the three pieces of rebar you have pounded into
the ground.
•
Finally, take the four Hook & Loop straps and at even
intervals, as in the picture, insert them through
the notches at the top of the wind netting (two
on each side of the T coupler). Cinch them securely
to the net, then wrap the strap over the horizontal
pipe to support and secure it.
•
Dismantling: Unstrap the Hook & Loop
but leave it cinched to the netting. Lift the frame
and net off the rebar and lay it down. Slip the
netting off the frame. Dismantle the frame. Store
the rebar in the pieces of pipe with the corner
and T couplers attached. This will prevent damage
to the bottom of your storage bag. Fold the netting.
Place all pieces back in the storage bag ready for
the next use!
Portable Wind Fence $129.99 $64.99
SALE each Order
Product
5' Fence Screen $6.00 $5.00 per running foot Order
Product
10' Fence Screen $12.00 $6.00 per running foot Order
Product
Note: For lengths greater than
20' please use this email
order request .
|
