Television Cables Coiling Instructions by Coil n Wrap

Television Cable Product Instructions & Pictures

Congratulations! You have just purchased the most effective and inexpensive device ever invented to assist in the coiling of a TV cable. This package contains two Items.

1. A Hook & Loop® ™ Strap to secure the coiled TV cable
2. A Coil-It™ used to coil the TV cable.

Step 1. Install Hook & Loop Strap
Make a loop in the strap by inserting the plain end of the strap through the buckle end. Then pull the loop tight over one end of the TV cable. Leave the strap on the TV cable permanently.

Step2. Install Coil-It™
The Coil-It™ is a polymer engineered device with two holes, one hole smaller than the other. Slip the other end of the TV cable through the small hole. this requires some stretching of the Coil-It™. Once the Coil-It™ is on the TV cable, then slide the Coil-It™ down the TV cable 2 to 3 feet. See Figure 1. Leave the Coil-It™ attached.

Step 3. Coil Cable
You are now ready to coil. Hold the TV Cable and Coil-It™ in the left hand and the TV cable end in your right hand and make your first coil. See Figure 2. Then slip the end through the large hole about 1 or 2 inches. Begin coiling by rolling the TV cable toward your hand using a hand under hand motion. See Figure 3. Do not try to coil the TV cable as you would a rope or lariat. Try pulling the other side of the TV cable toward you using a smooth hand under hand motion nd keeping the coils together until you reach the strap. Upon reaching the strap, you simply wrap the cinched strap around the coiled TV cable. The task is complete.

Buy this Product

The Coil n' Wrap™ product is fully guaranteed and if for any reason you are not satisfied, you may return the product for a full refund. Coil n' Wrap™ also makes a Coil n' Wrap™ for your water hose, 10 gauge, 12 to 14 gauge and 16 gauge electrical cords and cables.